G650ER

Haven't seen this posted on the forum yet, but I had been looking to dust proof my display cases and was finally able to put the time towards doing so... After having researched the web, I reached out to my local Canadian Tire (any hardware store depending on your country/region ex. Rona) and picked up the material.

Material Required: For the Canadian collectors, I picked up this closed cell insulating foam tape from Canadian Tire. The dimensions I found to be suitable were 5mm x 9mm running at 5.2 m (entire roll's length). I ended up using 3 rolls for all 4 display cabinets, though found the lengths to be inconsistent (was surprised/lucky 3 tapes was just enough for all cabinets). A 4mm thick tape would also work, but I found the 5mm to be just perfect to block off the dust. I provided a photo at the end of the exact product used.

Installation: While the tape is easy to cut and install, removing the door will be necessary. Placing the tape at the edge of the walls will be a good location to block off the dust, while allowing the door to open/close. For the top and base, it's a bit trickier as alignment will have to be slightly further back, and depending on how well (or badly) your Detolf is built, you'll be able to either have the tape go laterally all the way, or have to cut it where the metal magnet meets the cabinet. Hopefully it's a little clearer on my photos below. If you can get a roll of 4mm tape, then that would probably work better for the top/base, especially if you want to seal off near the magnet areas.

YULsee26

Great idea! I will definitely need to give this a try! Thank you for the info and photos Jan.

Btw - beautiful collection :P

__________________
Head in the clouds - feet on the ground

My Collection:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

triple7

Now that's one heck of a collection. Thanks for sharing your tips!

kcargo

You've got an awesome collection buddy. Thanks for the tip.

Kitty Hawk 1903

That's exactly what I did. Works great. Lovely collection.

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



David

StillAir

Sorry, no Pictures visible

AIR FRANCE 340

Looks very interesting …
But unable to see the photos.

Jean Pierre.

G650ER

My bad, I edited the post with another source for photos... I forgot how awful Photobucket had become (meaning they want $$ from you).

G650ER

Thanks Marek! Just need to dedicate a couple of hours to do so.
Thanks Kevin! Can't complain about some of the beauties I own
Glad to hear your collection has been protected longe than mine

umk747

This looks awesome! I was thinking of doing the same but was worried about the weight on the glass shelves? Looks like you've had no problems though!

Kind regards,
umk747

D.A.K.O.T.A

Excellent collection and solution for these units.

__________________
Dak

KLM4me

I have considered doing this to mine, too! I like that you used black foam instead of white, which is what seems to be widely available. The black is not as visible.

AIR FRANCE 340

Thank you for the pictures.

Great idea and great models ! !

Jean Pierre.

airlineguy

Hi Jan Jasinski,

You indeed have a great collection.

Thanks for taking the time to post the pics.

Mystère

Interesting. Here are other options, from a nearby company :

Joints en accessoires de vitrinexpo 27

I used the transparent one to dust proof one of my cabinet. A bit difficult to apply, but with a pretty good result.

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

"Open your eyes, because the revolution won't be televised"

Still looking for following 1/400 models :
AIR FRANCE Concorde F-BVFC & F-BVFD
AIR FRANCE 747 delivery colors F-BPVH

fordxgt

What does everyone do for the glass for extra shelves? I have had some glass cut before and it cost more than buying a new case from Ikea.

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Looking for:
Eastern L-1011 with customer logos (IF200)
Delta 727-200 Widget (GJ200)

AIR FRANCE 340

Try synthetic glass, 4 mm is fine, 5 mm is better for an A 380.

Jean Pierre.

Seven-Eight-Seven

I got distracted by your beautifulcollection, and forgot the focus was on the Detolf shelves. Great idea for those gaps, which deterred me from getting them. This changes my feeling about the Detolf.. It looks pretty good. Thanks for sharing with us!

Gold Leader

Hmmm very interesting idea indeed also great collection you have there man
Thanks for sharing that and this idea

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

travsuz

I have 4 of these as well...and set up just like yours. Except not insulated. :-)

Tajmashhad

@Jan Jasinski, What did you use to add the extra shelves to the Detolfs please?


Nevermind, found videos on Youtube