Antonov An-225 Mriya

VNAB777ER · 02-13-2008, 06:51 AM

Last few month or so ago we asking the manufacture to produce this model, have any manufacture considering it yet? I'm positive that almost all collector will buy at least 1 or 2 of this model. This hobby missing this model in 1:400 scale.
Photos: Antonov An-225 Mriya Aircraft Pictures | Airliners.net
Photos: Antonov An-225 Mriya Aircraft Pictures | Airliners.net
Photos: Antonov An-225 Mriya Aircraft Pictures | Airliners.net

aritrixa · 02-13-2008, 07:04 AM

Quote:

This hobby missing this model in 1:400 scale.

Agree with you on this. I will get one, for sure.

But, if I was the manufacturer, I have something that bother me much: "Economy of Scale".

1. Developing mold cost vs estimated sales.
2. How to utilize the mold for multi-release outside fantasy liveries.
3. How many collector out there in this planet?

I am not a bussinessman...just my 2 cents.. I could be totally wrong

Peace...

Abraxas · 02-13-2008, 07:43 AM

Yeah I'd buy one, even with the space shuttle on top if they wanted...
But not holding my breathe either

Dan

airbelgium · 02-13-2008, 09:24 AM

A friend of mine once asked Herpa if they would consider making this. Answer was no for exactly those reasons mentioned by aritrixa. To be honest, I would probably get just the one, but certainly no fantasy models

aviatorisu · 02-13-2008, 10:19 AM

Here we go again...

Z

goldy · 02-13-2008, 10:42 AM

You might one day see something from Model Power. I would bet that if that did occur that you saw it at WalMart that you would be horrified by its scale.

Peewee

BuddyK · 02-13-2008, 12:25 PM

From the Gemini Jets forum:
----------------------------------------------------------------
Originally Posted by 747SP
............ I'm waitin for the AN-225 in a gemini .............
----------------------------------------------------------------
(Gemini Will's Reply)
With regard to the AN-225, it is very unlikely to see light of day. We do get asked about this constantly, but with only two possible releases, development (that runs into tens of thousands) would not be cost effective.
----------------------------------------------------------------

Sad ... but true.
Buddy

aviator8883 · 02-13-2008, 12:50 PM

Yeap, there are two real aircraft livery possibilities, not just one!

Current:

Soviet:

I'd take the Soviet one for sure! I'm guessing Dragon would be a more likely candidate to produce this model, since they have already made the A300-600ST and the C-5A.

aViatOr

LOT 737-300 · 02-13-2008, 12:52 PM

I think there could actually be more than 2 possible real releases (like 3), but that in it's own sense would require a new mould (Buran), which too might be beneficial to develop a Energia Launch system for it too, which also would have a cost, though if someone was to make the Myasishchev M-4 it can lead to the MVT which would have tons of variants and justify the costs of a 3rd config for a Buran shuttle as well as have tons of other payloads that could be made.

But with only 1 produced, and only 2 different schemes avalible as a stand alone, I doubt we might see one from the likes of GJ/AC/DW. I'd give herpa as a skechy area since they always oscillate between no and maybe for this one, and as for 5*/BBX/Netmodels/whatever they call themselves now could be a yes, since they always seem to produce some stuff that no one else has produced for whatever reason. Otherwise, there is always that 1:700 scale version out there, I think it was all plastic, but I've seen the kits on Ebay.

aviatorisu · 02-13-2008, 01:41 PM

Can we maybe get a sticky for this topic since we seem to rehash it every month??

Z

Prestwick Pioneer · 02-13-2008, 04:54 PM

Good idea Zach, Id buy the model, but there are other releases Id like to see first.

Bangkok Lady La · 02-13-2008, 05:29 PM

You may see it in a kit form due to the size of it - but that would not satisfy the metal maniacs..

dboyd001 · 02-13-2008, 05:38 PM

Quote:

Originally Posted by goldy

You might one day see something from Model Power. I would bet that if that did occur that you saw it at WalMart that you would be horrified by its scale.
Peewee

..... That would be my bet. If anyone ever makes an AN-225, it will be a cheap, crude toy. No serious collector here would want one. Dredging up this topic on a regular basis isn't gonna make one suddenly happen.
..... Be that as it may, I'm not really interested in a AN-225 model. I can't get excited. I wanted a 1/400 Boeing 314. I settled for a Corgi model of it and I'm happy enough. May not be 1/400, but I got one.
Dave

tbc · 02-13-2008, 06:37 PM

Well, if past records are anything to go by, it will most probably be DW coming out with this first - they did make the Saturn thingy, quite limited possibilities with that mould

But then as records go too, we're likely to see multiple releases from different makers of the same bird, same registration, same colours, within a week of each other ! : )

A Tupolev · 02-13-2008, 09:43 PM

Quote:

Originally Posted by aviatorisu

Here we go again...
Z

Oh yes, the every two months someone posts when will the AN-225 be in 1:400

And every two months for the last three years (time I've been on DAC) no mfg has produced a AN-225 in 1:400.
As this topic comes up like clockwork every two months, I suggest a sticky post on the AN-225.

Master Shake747 · 02-13-2008, 10:51 PM

Quote:

Originally Posted by aviatorisu

Here we go again...

Z

My exact thought even before I opened the link

SDF · 02-13-2008, 10:51 PM

I will buy at least one for sure, along with any well-made Russian/ex-Soviet new releases.

A Tupolev · 02-13-2008, 11:02 PM

Quote:

Originally Posted by SDF

I will buy at least one for sure, along with any well-made Russian/ex-Soviet new releases.

Do you live in Louisville SDF? I'll be in Louisville tomorrow. I'm flying in for a White Castle slider, then flying back to LAX.

TexAV8R · 02-21-2008, 05:23 PM

Curious.. maybe this has been discussed in another thread, but I was wondering what it takes to create a mould for a new model. Perhaps someone here can shed light on what goes into making a new mould and why the whole process seems to be complicated and cost-prohibitive.

Groover158 · 02-22-2008, 01:29 AM

Quote:

Originally Posted by aviatorisu

Can we maybe get a sticky for this topic since we seem to rehash it every month??

Z

Didn't you say that last time? I think we need a sticky for your response

davesoda · 02-22-2008, 03:53 AM

Man I'm sick of seeing a when are we going to see a AN-225? Its boring guys! I want one as much as the next person but consistent asking is just boring!

Rupom · 02-22-2008, 08:33 PM

Well for me it's a must have, but now that I realize the possibility of this one being made in 1:400 is zero, I don't even think about it anymore.

continental · 02-27-2008, 07:06 PM

What is better: Gemini Jets or Herpa?

Anyone who takes this seriously is a certified doofus.

Rupom · 02-27-2008, 07:39 PM

Quote:

Originally Posted by continental

What is better: Gemini Jets or Herpa?

Anyone who takes this seriously is a certified doofus.

Totally depends on personal choice. I like Gemini Jets better, but Gemini is going downhill as they don't seem to have any sort of quality control anymore. They have a history of reproducing models that have major flaws. Seems like once they make something that's it for that mould. Herpa is getting better. Given curent Gemini trend I think I'd rather see the An-225 from Herpa and hope they make it all metal.

JustPlaneCrazy · 02-27-2008, 07:53 PM

So, let me get this straight......you guys think a manufacture will produce this airframe so they can release maybe 2 versions?

Let's see....if the mould cost is around $15,000, how much do you think those 2 releases will cost you at retail

I'm with Zac...

Quote:

Here we go again...

Z

02-13-2008, 06:51 AM	#1
VNAB777ER Collector Join Date: Feb 2008 Location: Sydney, Australia Age: 30 Posts: 126	Antonov An-225 Mriya Last few month or so ago we asking the manufacture to produce this model, have any manufacture considering it yet? I'm positive that almost all collector will buy at least 1 or 2 of this model. This hobby missing this model in 1:400 scale. Photos: Antonov An-225 Mriya Aircraft Pictures \| Airliners.net Photos: Antonov An-225 Mriya Aircraft Pictures \| Airliners.net Photos: Antonov An-225 Mriya Aircraft Pictures \| Airliners.net

02-13-2008, 07:43 AM	#3
Abraxas Master Collector Join Date: Feb 2006 Location: Sydney, Australia Age: 25 Posts: 572	Re: Antonov An-225 Mriya Yeah I'd buy one, even with the space shuttle on top if they wanted... But not holding my breathe either Dan __________________ Reaching for the Skies... Upcoming Flights 02/10/08 EY451-EY011 SYD-AUH-LHR A345-A346 \| 24/10/08 EY038-EY450 CDG-AUH-SYD A332-A345 01/11/08 QF575 SYD-PER A332 \| 03/11/08 QF582 PER-SYD B743 COLLECTION \| TRADE

02-13-2008, 09:24 AM	#4
airbelgium Senior Collector Join Date: Jul 2002 Location: Lanaken-Belgium Age: 33 Posts: 427	Re: Antonov An-225 Mriya A friend of mine once asked Herpa if they would consider making this. Answer was no for exactly those reasons mentioned by aritrixa. To be honest, I would probably get just the one, but certainly no fantasy models __________________ Ive "Aviation Safety is never something you get to; It's always something you're striving toward"

02-13-2008, 10:19 AM	#5
aviatorisu Cunning Linguist Join Date: Sep 2003 Age: 31 Posts: 1,227	Re: Antonov An-225 Mriya Here we go again... Z

02-13-2008, 10:42 AM	#6
goldy Complete Wacko! Join Date: Jan 2004 Posts: 3,603	Re: Antonov An-225 Mriya You might one day see something from Model Power. I would bet that if that did occur that you saw it at WalMart that you would be horrified by its scale. Peewee __________________ Peewee offers free worldwide shipping www.pwe.hk

02-13-2008, 12:25 PM	#7
BuddyK Collector Join Date: Oct 2005 Location: Hilliard, Ohio Age: 50 Posts: 146	Re: Antonov An-225 Mriya From the Gemini Jets forum: ---------------------------------------------------------------- Originally Posted by 747SP ............ I'm waitin for the AN-225 in a gemini ............. ---------------------------------------------------------------- (Gemini Will's Reply) With regard to the AN-225, it is very unlikely to see light of day. We do get asked about this constantly, but with only two possible releases, development (that runs into tens of thousands) would not be cost effective. ---------------------------------------------------------------- Sad ... but true. Buddy

02-13-2008, 12:50 PM	#8
aviator8883 Master Collector Join Date: Sep 2006 Location: The Pearl of the West (MMGL), Mexico Age: 25 Posts: 633	Re: Antonov An-225 Mriya Yeap, there are two real aircraft livery possibilities, not just one! Current: Soviet: I'd take the Soviet one for sure! I'm guessing Dragon would be a more likely candidate to produce this model, since they have already made the A300-600ST and the C-5A. aViatOr __________________ *"'lOVe at fIrSt fLigHt!'"* ¡PONIENDO MUY EN ALTO EL NOMBRE DE MÉXICO! Someone PLEASE make an Embraer E-190 diecast metal model in Aeromexico, US Airways, JetBlue and Air Canada colors. Mexican aviation forum: www.fsmex.com/foros

02-13-2008, 12:52 PM	#9
LOT 737-300 ЛЭТ Су-37 Join Date: Mar 2005 Location: Somewhere near MCO. Age: 20 Posts: 1,157	Re: Antonov An-225 Mriya I think there could actually be more than 2 possible real releases (like 3), but that in it's own sense would require a new mould (Buran), which too might be beneficial to develop a Energia Launch system for it too, which also would have a cost, though if someone was to make the Myasishchev M-4 it can lead to the MVT which would have tons of variants and justify the costs of a 3rd config for a Buran shuttle as well as have tons of other payloads that could be made. But with only 1 produced, and only 2 different schemes avalible as a stand alone, I doubt we might see one from the likes of GJ/AC/DW. I'd give herpa as a skechy area since they always oscillate between no and maybe for this one, and as for 5/BBX/Netmodels/whatever they call themselves now could be a yes, since they always seem to produce some stuff that no one else has produced for whatever reason. Otherwise, there is always that 1:700 scale version out there, I think it was all plastic, but I've seen the kits on Ebay. __________________ My airport: Nowa Warszawa Int'l NWL http://www.freewebs.com/nwlairport PM me if you want Fantasy Flights. If you are interested in Joining BSA, please drop by our forum and make a post. http://s14.invisionfree.com/Bluesphe...ex.php?act=idx Last edited by LOT 737-300; 02-13-2008 at 12:57 PM.*

02-13-2008, 01:41 PM	#10
aviatorisu Cunning Linguist Join Date: Sep 2003 Age: 31 Posts: 1,227	Re: Antonov An-225 Mriya Can we maybe get a sticky for this topic since we seem to rehash it every month?? Z

02-13-2008, 04:54 PM	#11
Prestwick Pioneer Prestwick Pioneer Join Date: Apr 2000 Location: BIRMINGHAM ENGLAND Posts: 591	Re: Antonov An-225 Mriya Good idea Zach, Id buy the model, but there are other releases Id like to see first. __________________ The Prestwick Pioneer

02-13-2008, 05:29 PM	#12
Bangkok Lady La 2008 : Garuda Dc10 o/c!! Join Date: Jun 2002 Location: Sydney Posts: 1,151	Re: Antonov An-225 Mriya You may see it in a kit form due to the size of it - but that would not satisfy the metal maniacs.. __________________ We need a Garuda Dc10 as above . We need a Qantas 747SP and a South African 747SP in delivery colours. Everything else is trivial !

02-13-2008, 06:37 PM	#14
tbc Collector Join Date: Nov 2003 Posts: 115	Re: Antonov An-225 Mriya Well, if past records are anything to go by, it will most probably be DW coming out with this first - they did make the Saturn thingy, quite limited possibilities with that mould But then as records go too, we're likely to see multiple releases from different makers of the same bird, same registration, same colours, within a week of each other ! : )

02-13-2008, 10:51 PM	#17
SDF Master Collector Join Date: Feb 2005 Posts: 540	Re: Antonov An-225 Mriya I will buy at least one for sure, along with any well-made Russian/ex-Soviet new releases.

02-21-2008, 05:23 PM	#19
TexAV8R Senior Collector Join Date: Jul 2006 Location: Texas Posts: 278	Re: Antonov An-225 Mriya Curious.. maybe this has been discussed in another thread, but I was wondering what it takes to create a mould for a new model. Perhaps someone here can shed light on what goes into making a new mould and why the whole process seems to be complicated and cost-prohibitive. __________________ Stay on the bomb run, boys! I'm gonna get them doors open if it harelips ever'body on Bear Creek!(Major T.J "King Kong" from the movie Dr. Strangelove)

02-22-2008, 03:53 AM	#21
davesoda True Blue Aussie Join Date: Apr 2005 Location: Some where in Australia Age: 26 Posts: 162	Re: Antonov An-225 Mriya Man I'm sick of seeing a when are we going to see a AN-225? Its boring guys! I want one as much as the next person but consistent asking is just boring! __________________ Cheers for now, Dave

02-22-2008, 08:33 PM	#22
Rupom Senior Collector Join Date: Jan 2006 Location: SoCal U.S.A. Age: 25 Posts: 225	Re: Antonov An-225 Mriya Well for me it's a must have, but now that I realize the possibility of this one being made in 1:400 is zero, I don't even think about it anymore.

02-27-2008, 07:06 PM	#23
continental I am come from Texas. Join Date: Dec 2003 Location: I might keep suffering all my life Posts: 1,906	Re: Antonov An-225 Mriya What is better: Gemini Jets or Herpa? Anyone who takes this seriously is a certified doofus. __________________ Continental Apply suction to the object of your choice, n00bs.