HELP with Herpa Premium 737 Display

davidlloyd · 05-10-2003, 05:19 PM

I have a Giessen Herpa Premium 737 with a hangar. It is attached to the base with a screw that holds a plastic piece that somehow snaps into the base of the aircraft between the main gear. I remove the screw from the bottom of the base and the aircraft and the plastic piece come apart from the base, but how does the plastic piece detach from the aircraft. Thanks to anyone who can help.
Dave

JSchultz · 05-11-2003, 10:22 AM

Very Carefully pinch the clear plastic tabs inward that are located on the bottom of the base that is lodged in the landing gear bay. That will pull apart the plastic tabs that are inside the landing gear bay and should release the model. Make sure you don't drop the model when you do this.

Good Luck!

Jim

davidlloyd · 05-11-2003, 10:26 AM

Jim,
Couldn't have been simpler. Thanks for the tip.
Dave

05-10-2003, 05:19 PM	#1
davidlloyd Senior Collector Join Date: Mar 2002 Location: Pueblo, CO Posts: 305	HELP with Herpa Premium 737 Display I have a Giessen Herpa Premium 737 with a hangar. It is attached to the base with a screw that holds a plastic piece that somehow snaps into the base of the aircraft between the main gear. I remove the screw from the bottom of the base and the aircraft and the plastic piece come apart from the base, but how does the plastic piece detach from the aircraft. Thanks to anyone who can help. Dave

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

05-11-2003, 10:22 AM	#2
JSchultz Junior Collector Join Date: Jul 1999 Location: Fort Worth, TX, USA Posts: 29	Very Carefully pinch the clear plastic tabs inward that are located on the bottom of the base that is lodged in the landing gear bay. That will pull apart the plastic tabs that are inside the landing gear bay and should release the model. Make sure you don't drop the model when you do this. Good Luck! Jim

05-11-2003, 10:26 AM	#3
davidlloyd Senior Collector Join Date: Mar 2002 Location: Pueblo, CO Posts: 305	Jim, Couldn't have been simpler. Thanks for the tip. Dave